Custom aspect ratios
We are planning to use Yodeck on big LED displays which are built with 32x32 modules. It works fine otherwise, but it's not very intuitive if aspect ratio does not match on the Show editor.
For example, display has 480*96 resolution. This is 16:3.2 .. Yodeck has choices 16:4.5 and 16:3, which means 480x135 or 480x90. When editing with 16:4.5, you have to remember not put anything on the bottom or it won't be visible.
So, why can't I set the aspect ratio to any custom values?
Support for custom aspect ratios has been released. It should make managing non-typical screens, video walls, and LED matrix displays much easier.