How does Yodeck support powering on and off monitors and TVs? Are all monitors and TVs compatible with this feature?

Yodeck Playbox (or Raspberry Pi in general) includes a CEC adapter on its HDMI monitor port. CEC is a standard communication protocol supported by most major TV manufacturers. It allow for a playback device (Yodeck Playbox) to power on, power off, and switch video inputs on a CEC-enabled TV. Check out the CEC compatibility chart.

If your monitor does not support CEC (e.g. you have a computer monitor), Yodeck Playbox turns off the HDMI port to allow for the monitor to power-down by itself. This function is supported by all current computer monitors, even some TVs.

If you are using a PC as the Yodeck player, CEC is not supported at all. The software will attempt to turn off the HDMI/VGA port, but this might not be supported by your hardware. Same goes if you use a HDMI-to-VGA adapter on Yodeck Playbox.

In the future, we will provide support for using infrared LEDs to signal the monitor on or off through IR, just like normal TV remotes do. For large installations, we can support custom solutions, like the above, or using custom serial connections to monitors. Also, we will be providing programming hooks that will allow you to create custom scripts to power on/off monitor.

Feedback and Knowledge Base