General
332 results found
-
change video duration
define youtube videos duration.dor example it could stop some time before the end of the video.
4 votes -
shows numbers of affected Monitors per push
When Pushing to the Monitors the number of affected monitors should pop up.
3 votes -
Show editor Improvements
- We like to have a bigger (full screen?) show editor, if you have small show elements like i.e. 60px high Ticker its hard to position them.
- The Grid Interval should be a config parameter
- The objects should be movable by curser keys in steps (grid or single pixel when pressing shift or other hot key.
2 votes -
Manage email alerts on a per player basis
I have a testbench yodeck player that may not be online 24/7 (sits on my desk to test when needed). It would be nice to be able to turn off offline alerts for specific players, like my testbench player, but keep other player's alerts on.
12 votesThis makes 100% sense, and there are many cases. To name a few:
- “on-off” test players
- “known problems”, like a Player that is offline and it is actually OK to be so, e.g. due to known internet issue at the installation site
- sites where the power to the Player is cut off every nightWe are planning to support the option to mark an offline Player as “OK” until a given date or until it comes back online, so that notifications and stats are kept clean.
Concerning on-off Players, we could provide an option for customizing the timeout per Player for sending an email (currently fixed at 5 hours and 24 hours). An even more complex option would be to use a Schedule for determining when a Player should be online, but I think this would be overly complex and would not provide any significant advantage over…
-
create ical based schedules
Adding the ability to add schedules automatically based on ical events.
Options expected could be:
show: which show to play
pre-Event time: duration before the event the show is shown
post-Event time: duration after the event the show is shown3 votes -
Time defined widget overlay
It would be useful to enable widget OVERLAY during only one video or exact period in show. Now overlay can be presented during whole show as second overlay playlist or between two items without overlay...
2 votes -
QR Code Option
QR Code creator internal for yodeck. The thought here is there is often more information than can be read or should be displayed at one time. Perhaps there is an option for Yodeck to automatically create a QR code for pages that optionally could be included on a corner of a page allowing whoever is reading the page to pull up more information through the QR code. This would be activated by page or could be created for each although each page, when this option is selected, would need granular information to ensure the QR code directs to the correct…
2 votesWe do have a QR Widget that you can use to display a QR code. What is actually missing is the ability to sync Playlists. You could have the Web Pages on one Playlist and the QR Widgets on another Playlist. You would then overlay the QR Playlist above the Web Playlist and sync them, so that their timing matches and they change at the same time.
Playlist syncing is an accepted feature that we are planning to implement: http://support.yodeck.com/forums/301815-general/suggestions/32013310
Would that do?
-
Implement OSC (Open Sound Control) commands
It would be great to have options to trigger events in Yodeck. For example, showing a normal slideshow, but with the push of a button show specific content. OSC is a great protocol for this and more and more apps and programs 'speak' OSC. So by adding a OSC library to the Raspberry image of Yodeck and by implementing some OSC commands (interrupt current show to play show X or videofile Y once) would be perfect.
5 votes -
9 votes
-
Add repeat every Sunday Monday Tuesday ETC to Media - Advanced features
When editing Media under advanced features it would be very helpful to have it repeat every Monday so that our customers can post Monday's menu to the playlist and have it play every monday.
4 votes -
Expiration dates for playlist
Would be nice to set expiry date for a playlist or sub playlist.
2 votes -
add more functions to pixie editor
add some functions from pixie editor main project (see https://pixie.vebto.com) like duplicate text, show the actual font type which is selected ; add shadow to pictures, add frame, etc...
2 votesWe will be investigating changes and, if it make sense, we will be updating Pixie editor on our next release.
-
logica condicional en listas, normalizar audios
Normalizar audios o permitir ajustar volumen por cada video. especialmente para el background audio. Usar logica condicional en listas segun valores externos. Es decir, si la lista consulta una pagina desde donde envio la temperatura actual o la humedad, que se reproduzcan segun el valor diferentes listas, util para promocionar helados en dias calidos o cafe en dias frios o lluviosos por ejemplo.
1 vote -
Bulk editing of tag based playlists
The ability to bulk add tags to tag based playlists like you can for editing media tags.
3 votes -
Email alert on high temp readings
I recently discovered what a thermometer icon in the upper right hand corner meant. As my screens are in multiple locations, I was unaware that a device was experiencing a temperature threshold. This is not apparent in the GUI at all.
Can this alert email the administrators?
Can this reading be made available in the online GUI?11 votesFirst, keep in mind that this icon indicates that the device is overheated so it is being throttled down (lowering performance) in order to prevent the temperature from rising. This has a performance hit, but it does not affect reliability severely. So, we do not consider it a critical issue. You have “hot” devices running, and they will work fine throttled.
The device temperature is available in the “Status” tab in the Monitor details of the Yodeck portal, so it is actually available in the UI.
It does make some sense to warn the user, since the overheating can be managed so that there is no performance hit. We are planning to create a kind of message centre inside the app to provide important messages to Users, which could include some device status alerts. I am marking this suggestion as “Accepted” and we will investigate when this message center is…
-
Conference room from Calendar
Decent calendar widget that connects to Google services. Allows for room usage display for conference suites or single room information aka Condeco.
3 votes -
Pricing
While the idea of yodeck is great, most people looking for a raspberry pi videowall system are trying to find an alternative to other expensive videowall systems out there. It truly defeats the purpose of using extremely affordable equipment paired with a susbcription fee that would in the end turn out to be more expensive.
Imagine honda selling $100,000 car in order to be sustainable? Some might buy them if they can afford them, but Hondas were made for very specific market (the ones who couldn't afford a Mercedes).
Imagine how cool it would be to actually be able to…
3 votes -
Move add/edit/delete icons to left
Would like to see add/edit/delete icons (actions) moved to the left of the screen near the item name, i.e. monitor name. On larger monitors, that is a lot of mouse travel to get to the most clicked part of the page
1 voteWe are planning to provide a way to customize the listing columns, so this could be considered. Until that time comes, I am marking this suggestion to be reviewed.
-
Play ads based on CPM
Allow us to set a specific number of times an ad will play. For CPM we sell ads based on the 1000 impressions. With your system I am only able to put it up based on date, not number of times it plays.
7 votes -
Content triggering
Hello,
It will be nice to be able to trigger content on demand via an external physical source like a USB button or via a UDP command form a mobile app. Features like play media on demand or be able to control playback features.
57 votesWe are planning to provide trigger support within 2020.
We are now in the process of restructuring our rendering engine in order to allow several features to be implemented. One of these features is triggers. We are planning to initially support UDP, TCP/HTTP, GPIO events, and then support keyboard/mouse events.
[Draft Specs follow:] Triggers will be available as a different menu item, in order to manage, set them up, test them, and so on. After setting them up, Users will be able to use them in Playlists, e.g. to skip a Media (or Subplaylist) entry, jump to specific Media (or Subplaylist) entry, and so on.
- Don't see your idea?